| Sensing type |
BGS reflective type |
| Sensing distance |
3 to 50 mm |
| Sensing target |
Opaque, Translucent material |
| Min. sensing target |
≥ Ø 0.1 mm |
| Hysteresis(distance) |
Max. 10% of sensing distance |
| Black/white error |
Max. 10% of sensing distance |
| Response time |
≤ 0.7 ms |
| Light source |
Red LED(650nm) |
| Mutual interference prevention |
≤ 4 units |
| Operation mode |
Light ON |
| Indicator |
Operation indicator (yellow), stability indicator (green) |
| Unit weight (packaged weight) |
≈ 25 g (≈ 45 g) |
| Power voltage |
10 – 30 VDC (ripple P-P: ≤ 10 %) |
| Current consumption |
Max. 20mA |
| Control output |
NPN open collector |
| Protection circuit |
Reverse power polarity, reverse output polarity, output short-circuit over-current protection |
| Insulation resistance |
≥ 20 MΩ (500 VDC megger) |
| Noise immunity |
The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC |
| Dielectric strength |
Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration |
1.5 mm double amplitude or 300 m/s² at frequency of 10 to 2,000 Hz in each X, Y, Z direction for 0.5 hours |
| Shock |
1,000m/s² (approx. 100G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination |
Sunlight: ≤ 10,000 lx, incandescent lamp: ≤ 5,000 lx |
| Environment_Ambient temperature |
-25 to 55 ℃, Storage: -30 to 70 ℃ (rated at no freezing or condensation) |
| Environment_Ambient humidity |
35 to 85% RH, storage: 35 to 85% RH |
| Protection structure |
IP67(IEC standard) |
| Connection |
Cable type |
| Connector type |
M8 4-pin plug |
| Material |
Case: PC / sensing part: PMMA / bracket, bolt: stainless steel 304 |
Reviews
There are no reviews yet.